Standards are supposed to make life easier. Devices from different manufacturers should talk to one another. My favorite was the original “plug and play.” Not. The same may be said of “class compliant” USB, leading us to believe drivers aren’t needed. Display to multiple monitors? Well, there’s 1.1, or 1.3 or 1.4. Which HDMI? If there were standards, blades or other accessories from one blender or mixer or coffee pot would work with others. “Standards” are set in place to make sure things are “standardized.” Like #2 Pencils whose lead varies widely. Number #2 Phillips screwdrivers. Some are deeper and pointier at the tip, some are more robust. Some are magnetized. Forget all that, lets get to something important. Like synthesizers.
The little white MXR box in the photo – I’ve had that since 1975. I still have it because I know standards are baloney. Several years ago, I decided to back out of the computer and get myself some gear with knobs again. There was all this noise about “euro rack standard” for inter-connectivity. More baloney. I bought a Moog Mother 32. I was so proud. I sold some stuff I liked to buy it, and it cost too much for what it was, but I knew Dr. Bob from way back. It sounded like a Moog. Sort of. I won’t go into why I sold it, but I did. For a combination of reasons. Not so “Standard” factored large because it wasn’t. Just like it wasn’t in 1975 when I went on an adventure from couch surfing in OKC all the way to Garland Texas, home of Arnold and Morgan Music. I bought an Oberheim SEM from Charley Lowe. I called first to be sure they had one. They did, off I went. A cold front blew through while I was gone, and back in OKC I walked from downtown, in my hippie moccasins, in the slush, to where my gear was stashed. I didn’t die. It’s all down to youth, not diet or exercise or clean living.
What? I couldn’t trigger the OB with my MiniMoog? Hold on. I saw Jan Hammer do it. That’s why I…A custom cable? Cinch-Jones shorting trigger to 3.5mm mono +5. Huh? I took the schematic for the cable to the tech at the high end stereo store who always brought my Flame Linear power amp back from the dead. He laughed when I said I thought there were standards, because I’d read about them. Nope. Volt per octave pitch tracking, maybe. The rest? Hah! He built the cable for me, and later a tin project box that did it better. Fifteen bucks. And I had to listen to loud Rolling Stones and his screaming baby when I picked it up from his house.
Then came the synth mess in my gravatar. Four Moogs, an Arp, an OB module and an OB sequencer. That was my fake T-Dream video soundtrack and band synth rig. Without the MXR and a snake nest of cables with transistors inserted in them it would have been chaos. Rather, uncontrolled chaos.
The MXR was designed to take a signal and amplify it, sans coloration. The intended job being to sit on the output of a guitar, gain it up and clip the input of a guitar amp without altering (too much) the guitar’s tone. I stuck that bad boy on the output on the trigger signal of whatever was the boss, cranked it and popped the trigger inputs open on whatever needed to listen. Forty-three years ago. And I’m doing it now? How sad is that?
I worked for the guy who pushed for and developed MIDI to stop all that crap (backstory). But – Sequential and Roland, the two companies who adopted MIDI first? Is 1 zero or is zero zero? Program change 1-128 or 0-127? Standards. MIDI does work, though. Thank God. Even if it doesn’t require a gazillion colorful cables to do the same thing.
My MXR is still there if I need it to wake up a Moog with a Korg because trigger and gate are the same thing, different names. They’re “standard.” Only they’re not. I like my knob stuff. I like patch cables and all sorts of crazy sounds. I also like program memory, and foregoing that, at least pitch range selectors tied to a tuning so I have a short path back to reality. Even if that is a moral dilemma to some modular synth purists. There’s an old joke, when looking at a big modular synth draped in patch cords and some arteest going all artsy and talking poly rhythm modulations (baloney). The joke was was to elbow the person next to you and call out, “Okay, great. Now quick, tape’s rolling, get us a French horn.”
Which is why I sold the Moog. One oscillator, no range select and bunch of 3.5mm patch points that talked to each other and some of them to the outside world. And one very important one, the gate/trig, that required the MXR to function with certain external devices. Michelin money for a trailer tire? Baloney.
I solved a lot of the “standards that aren’t” with the Arturia Beat Step Pro sequencer. It sends out three sequences on three channels, or a butt load of gate/trig with enough voltage to blow open the most stubborn modern and vintage gear. The old “if they don’t understand you, talk louder” routine. But why should I have to buy another piece of gear to make the children behave?
Next up – power supplies. The MXR was built before wall warts were even imagined. There is no jack for one on the unit I own. 9V batteries only. There were days where it was buy batteries and play, or eat. The first time I saw a Radio Shack 9v wall wart with 9v battery terminals on it I freaked. It might have been $19. Ridiculous at the time. But it beat batteries. I borrowed a rat tail file from the guitar tech at Rock World and cut a hole in the MXR for the wire to escape. And even now wall wart jacks are various sizes, various voltages. Different barrel sizes on the supply, center + or -. Jesus. In my garage I have an old, beat up drummer’s trap case on wheels with years worth of power supplies. When I’m about to get rid of them a use pops up. How crazy is that? Gear does not communicate with each other, cables of different types and specs are required, power supplies are specific, active or passive, got a battery? My kingdom for a battery! My old bass player’s last girlfriend bought him a fistful of rechargeable batteries and a charger to keep him out of homeless shelters just keeping the active pickups in his basses functioning. This is about musicians, people. No wonder any player with money has a tech and IT runs any business with more than three people.
Retraction. “Switching on the lights, I trudged downstairs etc…” just reads stupid to me. I have been informed that it is a participle phrase that modifies “I”, the noun, not the (in my mind) associative action verb of trudged and is perfectly “legal” based on the position of the comma and “I”. As you wish. For my .02, that sort of thing, like Garlic and Cumin, starts to own whatever it’s in and a little goes a long way. It gets worse when they are used to modify the subject of a weak verb like “is”. Elmore Leonard sits in the back of my mind repeating, “If it sounds like writing, I rewrite it.” Follow the action, don’t sort it. Like Deepthroat. “Follow the money.” “Following the money, crooks you will find,” or “you will find crooks” sounds like Yoda, doesn’t it? Stilted? Regardless of my opinion, the one big takeaway is – Do not leave your participle hung out to dry or you will be arrested by the grammar Nazis for exposing your dangling modifier!
Here you go, “ing” as a noun modifier and not a weakened verb.